Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil on a 2012 Dodge Avenger

Model: Dodge Avenger MK 1 - Years 2008-2013
Part: Service warning light

The following video tutorial will explain how to reset the oil light on a Dodge vehicle. To reset the oil light on a 2012 Dodge Avenger, we need to press the accelerator pedal 10 times consecutively before turning on the ignition. Once the oil light turns off, turn off the ignition and then turn it back on. This operation is only valid after replacing the engine oil in the tank, otherwise you could damage the engine by continuing to use the used oil. If the light is not reset, it is possible to reset it using a scanner and OBD port.

Posted on 4 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil on a 2009 Dodge Avenger
How to reset the oil on a 2009 Dodge Avenger
Dodge Avenger (2008-2013 / MK 1) After replacing the motor oil in the 2011 Dodge Avenger's tank, it is necessary to proceed with resetting the oil light. To reset the light, we must …
How to reset the oil light on the Dodge Avenger
How to reset the oil light on the Dodge Avenger
Dodge Avenger (2008-2013 / MK 1) In the following guide dedicated to all of you who own a Dodge Challenger, we will discover how to correctly perform a manual reset of the oil light …
How to replace the battery in the Dodge Avenger key.
How to replace the battery in the Dodge Avenger key.
Dodge Avenger (2008-2013 / MK 1) It is not always necessary to buy a new key for your Dodge Avenger when the one you have suddenly stops working. In fact, many times the problem is c…

Other guides you may be interested in

How to Replace the Rear Indicator Bulb on an Audi A3

Position the car on a ramp or flat surface and immobilise it. Now, open the boot lid and, inside, corresponding to the rear light where you want to replace the indicator bulb, remove the small plastic cover using a screwdriver. Inside the hole, you will find a bolt (to be removed with a flat screwdriver); once this is undone, you can remove the entire rear light assembly. After this, proceed to remove the part inside the light assembly by unscrewing the 2 small bolts, as shown in the images. In the part you just removed, all the bulbs of the light are mounted. To replace them, simply remove them from their sockets and fit the new ones. To reassemble the entire unit, repeat all the steps shown in the images in reverse order.

Watch the video!


by ScegliAuto

More videos