Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Charger
    4. : How to reset the service light on the Dodge Charger.

Dodge Charger - Video tutorial

Model: Dodge Charger LD - Years 2011-2023
Part: Checks and maintenance
Operation: How to reset the service light on the Dodge Charger.

To reset the service of the Dodge Charger, start by pressing the brake pedal, then press the ignition button twice to turn on the instrument panel without starting the car's engine. Now, operate the buttons on the right side of the steering wheel: press the button with the downward arrow until the screen displays "vehicle info," then press the button with the right arrow until the screen shows "oil life." Now, hold down the "ok" button until the percentage reaches 100. The reset has now been completed, and you can turn off the instrument panel.


Posted on 21 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Charger 2011-2023 - Why is the center display of the Dodge Charger not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos