Do it yourself
| ||||
|
Dodge Journey - Video tutorial
Model: Dodge Journey
MK 1
- Years 2008-2020 In this tutorial, we can see how to replace the right engine mount in the Dodge Journey, a simple operation but one that requires a lot of attention. First of all, we place a jack under the engine to support it, then we open the hood and locate the mount in question, located right next to the oil filter. We then unscrew the 3 bolts with a 15mm wrench and the single nut with a 13mm wrench, then we continue by removing the mounting bolts of the mount itself and separate it from the engine. At this point, we can position the replacement and follow the reverse procedure.
Posted on 22 August 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |