Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Fiat Ducato 3.0 Diesel

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

Today, we will discover the main information useful for dismantling and replacing the timing belt on the Fiat Ducato 3.0 Diesel. To access the timing belt, it is necessary to remove the engine mount, then raise the vehicle and disconnect the alternator belt.

Remove the crankshaft pulley and the timing cover, as shown in the video. At this point, take the necessary references marked on the pulleys to remove the old timing belt; then install the new original one, following the video tutorial to the end!


Updated on 27 October 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on a Fiat Ducato
Guide to Replacing the Timing Belt on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Today, we will discover the procedure for removing and replacing the timing belt on a Fiat Ducato, following the instructions below. First, open the …
Guide to replacing the timing belt of the Fiat Ducato 2.5D
Guide to replacing the timing belt of the Fiat Ducato 2.5D
Fiat Ducato (1981-1993 / MK 1) The following steps will show us the main information on how to disassemble and replace the timing belt of the Fiat Ducato 2.5D. First, we lift the v…
Guide to replacing the timing belt of the Fiat Ducato 2.8 JTD
Guide to replacing the timing belt of the Fiat Ducato 2.8 JTD
Fiat Ducato (1993-2016 / MK 2) Today's main steps will allow us to disassemble and replace the timing belt of the Fiat Ducato 2.8 JTD. First, we lift the vehicle and start disconne…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos