Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Thermostat Valve on a Fiat Punto Mk2

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Valve

Learn how to change the thermostat valve on your car. First, remove the ignition coil for better access, then take out the air filter, the lambda sensor, and all other connectors present. Before removing the hose, drain the cooling system of any fluids. After that, proceed with the disassembly. Remove the valve and clean all residues of the old gasket to replace it with a new one. Now, finish installing the valve and then reassemble everything in reverse order. The job is done.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Thermostat from a Fiat Punto
Removing the Thermostat from a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will see how to remove the thermostat from a Fiat Punto. First, lift the vehicle and, using a 13 mm spanner, open the …
How to Change the Thermostat on the Fiat Punto 1400
How to Change the Thermostat on the Fiat Punto 1400
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The thermostat activates the exchange between the hot liquid in the engine and the cooler liquid contained within the radiator, which has been cooled…
How to Replace the Thermostat on a Fiat Punto 2 Series 8v
How to Replace the Thermostat on a Fiat Punto 2 Series 8v
Fiat Punto (1999-2011 / MK 2, 188) When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly und…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos