Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil of the 2010 Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine oil

See other generations:
Video tutorial

Today we will describe the steps to replace the motor oil on the 2010 Fiat Scudo. The first step is to open the front hood and then unscrew the cap of the motor oil tank.

The second step is to lift the vehicle and unscrew the nut that secures the oil pan and wait for the liquid to drain out. The third step is to close the oil pan and lower the vehicle. The fourth step is to remove the oil filter from the car, simply by opening the cap and removing it. Then you will need to install a new filter.

The first step is to insert the filter into its housing and close the cover. The second step is to pour the new oil into the motor oil tank.


Posted on 17 December 2024 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on a Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) The service light that illuminates on the instrument cluster of your Fiat Scudo Mk1 is fortunately just a reminder to perform a service on the vehicl…
Resetting the Service Light on the Fiat Scudo
Resetting the Service Light on the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) We will briefly show you the procedure necessary to reset the service light for the routine oil change on the Fiat Scudo. First, get into the vehicle…
How to replace the cabin air filter of the Fiat Scudo
How to replace the cabin air filter of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) If you want to independently replace the air filter located in the cabin of your Fiat Scudo, you just need to read the following guide and put into p…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos