Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove and Replace Spark Plugs on Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Spark plugs

See other generations:
Video tutorial

Remove and replace the spark plugs on a Fiat Grande Punto. Open the engine bay, lift the front bonnet, secure it with the provided prop (if available), and disconnect the battery terminals.

Remove the soundproofing panel covering the air filter and unscrew the coils on the engine head using a screwdriver. Next, use a socket wrench to unscrew the spark plugs and pull them out of the head.

Take the new spark plugs and guide them into the engine head using the socket extension, tighten them, and reconnect the ignition coils to each spark plug with the new connectors. Finally, close the engine bonnet and test the proper functioning by starting the car.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on the Fiat Grande Punto
How to Replace the Spark Plugs on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below is the procedure to remove and replace the engine spark plugs on the Fiat Grande Punto, following the instructions provided. First, open the bo…
How to Replace the Spark Plugs on a Fiat Grande Punto?
How to Replace the Spark Plugs on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the spark plugs on a Fiat Grande Punto, open the bonnet to detach the plastic cover on top of the engine block. Once the cover is removed,…
Replacing Glow Plugs on a Fiat Grande Punto 1.3 MultiJet
Replacing Glow Plugs on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to remove and replace the glow plugs on a Fiat Grande Punto 1.3 MultiJet engine. First, open the bonnet an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos