Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Fiat Ducato X290

Model: Fiat Ducato X290 - Years 2014-2026
Part: Service warning light

Before reaching the mileage required for the replacement of the engine oil of the Fiat Ducato, a message appears on the instrument panel display to warn us. After the replacement, we must reset the notification system. We sit in the driver's seat, turn on the instrument panel, press and hold down the accelerator pedal, press and release the brake pedal seven times, wait a minute, turn off the instrument panel and release the gas pedal. We wait another minute and remove the ignition key. Upon the next restart, we can verify the reset.

Posted on 14 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Fiat Ducato X290
How to reset the service indicator on the Fiat Ducato X290
Fiat Ducato (2014-2026 / X290) In this video, we can see how to reset the service light on the Fiat Ducato X290: when the ignition is turned on, the service light also comes on. Th…
Reset the maintenance interval of the Fiat Ducato.
Reset the maintenance interval of the Fiat Ducato.
Fiat Ducato (2014-2026 / X290) The steps illustrated in this guide will show us how to reset the maintenance interval of the Fiat Ducato; in this case, we will use a specific diagn…
How to Reset the Service Light on a Fiat Ducato X290
How to Reset the Service Light on a Fiat Ducato X290
Fiat Ducato (2014-2026 / X290) If the red oil light is flashing on your Fiat Ducato X290, you need to reset the counter. Here is the manual procedure to reset it without diagnostic…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos