Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel to Access the Lock on Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel to access the lock on a Fiat Punto, disconnect the battery terminals located in the engine bay. Using a screwdriver, unscrew the screws located in the upper lever space of the door opening and the screws present in the handle (after removing the plastic screw covers).

Remove the audio speaker cover, unscrew the remaining screws on the door panel and detach the retaining clips.

Pull the panel off by hand and disconnect it from the door (unplug the power wiring and the opening cable). Remove the adhesive covering and perform maintenance on the lock.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to Replace the Door Lock on a Fiat Punto?
How to Replace the Door Lock on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the door lock on a Fiat Punto, loosen all the screws securing the panel so that it can be removed, providing access to the components unde…
How to Remove the Lock from a Fiat Punto
How to Remove the Lock from a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) Before you begin, open the door of your Fiat Punto. Using a flathead screwdriver, pry out the window switch button, then disconnect and remove it. Ne…
How to Repair or Replace the Door Handle and Lock of the Fiat Grande Punto
How to Repair or Replace the Door Handle and Lock of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide provides instructions on how to remove and replace the external door handle and lock of the Fiat Grande Punto. First, open the front door …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos