Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine Soundproofing Panel on Fiat Qubo

Model: Fiat Qubo MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

Video tutorial

How do you maintain your Fiat Qubo? Follow this guide to remove the engine soundproofing panel. Open the car door and lift the engine compartment release lever located at the bottom left of the dashboard, then raise the bonnet and secure it. Using a socket spanner, undo the securing bolts (located at the sides) of the plastic soundproofing panel.

Remove the panel after taking out the bolts and disconnecting the ventilation hose. Carry out maintenance inside the engine compartment and finally close the bonnet.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Remove the Air Control Knobs on Fiat Qubo
How to Remove the Air Control Knobs on Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) How to remove the air conditioning control knobs and replace the LEDs/bulbs on a Fiat Qubo? Follow these steps: Unscrew the air vents located above t…
How to Replace the Front Glass of the Fiat Qubo?
How to Replace the Front Glass of the Fiat Qubo?
Fiat Qubo (2008-2019 / MK 1) To replace the front glass of the Fiat Qubo, first remove the screws located near the window switch panel and take the panel out of its housing. Next…
Removing Seats from a Fiat Qubo
Removing Seats from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In this short guide video, you will learn how to remove the rear seats from a Fiat Qubo; primarily, we will cover the essential steps. First, open th…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos