Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the steering angle sensor of the Fiat 500.

Model: Fiat 500 312 - Years 2007-2024

The main steps for today will allow us to disassemble and replace the steering angle sensor of the Fiat 500. First, let's open the car's hood and start by disconnecting the battery; then we will get inside the cabin and begin to disassemble and remove the steering wheel and its airbag by disconnecting the electrical connector and unscrewing the central screw, as shown in the video. At this point, it will be possible to remove the steering angle sensor by unscrewing the screws and disconnecting the wiring; we will replace the component with the new original one and reassemble everything!

Posted on 12 December 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to calibrate the steering angle function on a Fiat 500L
How to calibrate the steering angle function on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video, we can see how to calibrate the steering angle function of a Fiat 500L using a diagnostic system; this is done to reset the zero posit…
General guidelines for replacing the steering angle sensor on Fiat 500 cars.
General guidelines for replacing the steering angle sensor on Fiat 500 cars.
Fiat 500 (2012-2023 / 500 L) In this video we see a common problem with Fiat 500: it happens that when steering, the steering wheel stiffens. This is due to the fact that a senso…
Guide to Installing the Blockshaft on a Fiat 500
Guide to Installing the Blockshaft on a Fiat 500
Fiat 500 (2007-2021 / ) Today, in this guide, we will see the main procedure to install the blockshaft, or another model of engine ignition lock, on a Fiat 500. First, get i…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer
    • 500 2007-2024 - What happens when the "uconnect" on Fiat 500 expires? Read answer
    • 500 2007-2024 - Where is the jack on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos