Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Lock on a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Door lock

Remove the door panel on a Fiat Panda (old model) to replace the lock. Use a screwdriver to unscrew the securing screws located in the handle (if present), remove the window winder (release the securing fork as shown in the video) with the help of a screwdriver: pry around the door panel and detach it. Remove the lock with the opening button located inside the door. After disassembly, refit the new button with the lock inside the panel along with all the associated parts. Replace the locks on all the car doors.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Door Lock
Replacing the Door Lock
Fiat Panda (1980-2003 / 141, MK 1) This video shows how to replace the door lock on a Fiat Panda Classic. First, remove the internal armrest of the door, then release the clips that se…
How to Adjust the Bonnet Lock on the Fiat Panda
How to Adjust the Bonnet Lock on the Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) This guide will show you the steps to adjust the bonnet lock on the Fiat Panda. First, open the bonnet by pulling the lever inside, and use a socket …
How to Replace the Lock on a Fiat Panda
How to Replace the Lock on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) The video is based on the lock of an Autobianchi Y10, but the lock is identical to that of a Fiat Panda as they are sister models. Start by removing …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos