Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Connect Jump Leads on the Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Checks and maintenance

Let's see how to connect the jump leads for emergency starting on a Fiat Ducato (applicable to many models, including those with the battery under the floor or under the seat). The video shows that on the Ducato, we should not connect directly to the battery, which is often difficult to reach, but there are dedicated connection points in the engine compartment. The positive terminal is located in a small black box or in the fuse box of the engine compartment. In the video, they open it and inside is a terminal to which they attach the red positive lead. For the negative terminal, there is a specific marked point, which is usually a bolt or pin attached directly to the bodywork or engine.

Posted on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you install the spare wheel support for the Fiat Ducato?
How do you install the spare wheel support for the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) It will be possible to install the spare wheel support for the Fiat Ducato by accessing the underside of the vehicle's floor: once you have access to…
How to Remove the Diesel Filter on a Fiat Ducato
How to Remove the Diesel Filter on a Fiat Ducato
Fiat Ducato (2002-2006 / ) How to remove the diesel filter on a Fiat Ducato? Lift the front bonnet, and using a large screwdriver, unscrew the bolts securing the plate (you can…
Where to Find the Fuse Boxes on a Fiat Ducato
Where to Find the Fuse Boxes on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) In this tutorial video, you can see where the fuse boxes are located on the Fiat Ducato. The Fiat Ducato has three fuse boxes positioned as follows: …

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - Where to find the ignition lock diagram of the Fiat Ducato 1.9 Td? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos