|
Do it yourself
| |||
| ||||
How to Replace the Fuel Filter on a Ford Transit MK6 2.4 TDCi?
Model: Fiat Ducato
X290
- Years 2014-2026
The fuel filter on a Ford Transit MK6 2.4 TDCi is located in the engine bay, easily recognisable as a white cylinder. To remove it, unscrew the top cap clockwise. If it is stuck, use a large pair of pliers to loosen it, then continue by hand. Once the cap is removed, pull down the old filter, being careful of the alignment notches on its base. Before installing the new filter, which you can purchase from auto-doc.it with EAN code 4059191587018 for £11.49 plus £9.95 delivery, fill it with clean diesel to facilitate bleeding. Align the filter notches with those of the housing and push it all the way in. Refit the cap, tightening only by hand, without tools. To bleed the system, disconnect the fuel line on the right side (pressing the tab with a screwdriver). Connect a mechanical pump between the line and the filter, pumping until the diesel flows out without bubbles. Quickly reconnect the line and check for leaks.
Posted on 30 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Ducato
(2014-2026 /
X290)
In this video tutorial, you will see how to replace the fuel filter on a Fiat Ducato. First, purchase a new filter. Next, lift the bonnet and secure …
Fiat Ducato
(2014-2026 /
X290)
Let's see how to remove the cap of the fuel filter sensor on a Fiat Ducato 2.3. First, we need to locate the locking device: it is a yellow tab on th…
Fiat Ducato
(2006-2014 /
X250)
Replacing the fuel filter in a Fiat Ducato van, as shown in this tutorial, is a very simple and quick task. Before proceeding, wait for the engine to…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.114
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |