Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Air filter

How do you replace the air filter of a Fiat Panda? Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet; secure it. Open the soundproofing panel for the air (where the air filter is located), remove the panel with the filter box from the engine compartment, then extract the worn air filter and insert a new one, ensuring it fits snugly around the edges. Finally, refit the air box panel and tighten the securing screws. Close the front bonnet after maintenance.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…
How to Replace the Fuel Filter on a Fiat Panda
How to Replace the Fuel Filter on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Before you can start, open the bonnet of your Fiat Panda. Begin by unscrewing and removing the bolt that tightens the clamp securing the fuel filter.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos