Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Timing Belt on a Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

Learn how to remove the timing belt on a Fiat Ducato. Lift the front engine cover; remove the soundproofing panel and the timing belt cover.

Remove the front splash guard with the wheel. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat.

Using a socket wrench, unscrew the securing bolt of the tensioner pulley, and remove the water pump as shown in the video. Fit the new water pump (previously removed), the tensioner, and the belt itself, tightening everything with the socket wrench.

Finally, refit the rivets with the splash guard and reattach the wheel.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on a Fiat Ducato 2.3 MultiJet
Guide to Replacing the Timing Belt on a Fiat Ducato 2.3 MultiJet
Fiat Ducato (2014-2026 / X290) In this guide, we will discover the instructions that will allow us to dismantle and replace the timing belt on a Fiat Ducato 2.3 MultiJet. First, ra…
Guide to Replacing the Timing Belt on a Fiat Ducato
Guide to Replacing the Timing Belt on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Today, we will discover the procedure for removing and replacing the timing belt on a Fiat Ducato, following the instructions below. First, open the …
Guide to replacing the timing belt of the Fiat Ducato 2.5D
Guide to replacing the timing belt of the Fiat Ducato 2.5D
Fiat Ducato (1981-1993 / MK 1) The following steps will show us the main information on how to disassemble and replace the timing belt of the Fiat Ducato 2.5D. First, we lift the v…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos