Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Bumper on a Fiat Qubo

Model: Fiat Qubo MK 1 - Years 2008-2019
Part: Front bumper

Is the front bumper of the Fiat Qubo damaged? Here’s how to remove it. Open and lift the bonnet of the engine compartment, and using a socket wrench, remove the bolts located at the sides of the bumper. Remove the screws located at the bottom of the bumper and inside the wheel arch liners. Once the bumper is free from any screws or bolts, grasp it with your hands and pull it away from the bodywork (disconnect any power cables if necessary). Fit the new bumper onto the bodywork: screw in the securing screws at the sides of the wheel arch liners and at the front of the bumper. Close the bonnet of the engine.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Seats from a Fiat Qubo
Removing Seats from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In this short guide video, you will learn how to remove the rear seats from a Fiat Qubo; primarily, we will cover the essential steps. First, open th…
Reset Tyre Light on the Fiat Qubo
Reset Tyre Light on the Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) How do you reset the light on the Fiat Qubo? Turn on the ignition and reset the light. Inflate the tyres before performing the reset. Enter the cabin…
How to Replace the Window Switch Panel on a Fiat Qubo
How to Replace the Window Switch Panel on a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) Below, you will find the instructions that will allow you to remove and replace the window switch panel on a Fiat Qubo in simple and quick steps. Fir…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos