Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Handle from a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Handle

How do you remove the handle from a Fiat 500? To access the handle, you need to remove the door panel. Unscrew the securing screws in the fixed handle on the door panel, unscrew the pins located in the plastic of the door opening lever. Remove the handle from the door panel, then use a lever to detach the covering panel. Remove the adhesive cover from above the door, disconnect the opening lever cable, then unscrew the securing pins of the outer handle. Pull the handle out from inside the car door. Fit the new handle and screw in the screws.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) Here's how to remove the door handle from the right front door on a Fiat 500: disconnect the battery terminals located in the engine bay (if you need…
Fiat 500 (2007-2021 / 312) In today’s tutorial, learn how to remove the door handle and the lock cylinder on a Fiat 500 by following these simple steps. First, open the door an…
Fiat 500 (2007-2024 / 312) How to remove the external door handle on a Fiat 500? This video explains how to proceed. Before starting the disassembly work, disconnect the batter…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos