Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Engine Oil in a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Engine oil

How do you change the used engine oil in a Fiat Panda? Lift the car on a column lift or jack, remove the plastic cover panel under the engine bay if present, unscrew the oil sump plug with a socket wrench: let the fluid drain into a disposal container and re-screw the oil sump plug. Reattach the cover under the engine bay and tighten the securing screws. Unscrew the oil filter from under the engine bay. Measure the engine oil level once you have topped it up.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…
How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet
How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda 1.3 Multi-Jet. The oil filter is located near the oil filler neck. Begin by loosening the oi…
Oil Change and Replacement of Various Filters on Fiat Panda
Oil Change and Replacement of Various Filters on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Lift the bonnet, secure it and unscrew the top cap of the oil compartment. Next, raise the vehicle and unscrew the bolts that secure the lower engine…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How much engine oil does the fuel tank of the Panda 1 2 petrol contain? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos