Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch on a Fiat Grande Punto 1.3 MultiJet

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Clutch

Here are the instructions to remove and replace the clutch on a Fiat Grande Punto and Punto Evo, powered by the 1.3 MultiJet engine. First, remove the battery by disconnecting the terminals and taking out the battery tray; then lift the vehicle and remove the front wheels. At this point, separate the wishbones from the braking system by disconnecting the pins, and loosen the bolts of the left driveshaft to pull it out; next, disconnect the lower exhaust manifold and drain the engine oil by loosening the bolts. Finally, remove all the screws from the gearbox casing to access the clutch and replace it; follow the video to the end!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Follow these steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, as …
Replacing the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Replacing the Diesel Filter on the Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove and replace the diesel filter on the Fiat Grande Punto 1.3 MultiJet, as well as the Punto Evo. F…
Guide to replacing the starter motor of the Fiat Grande Punto 1.3 Multijet
Guide to replacing the starter motor of the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's main instructions will show us how to disassemble and replace the starter motor of the Fiat Grande Punto 1.3 Multijet. First, we open the hoo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos