Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the fuel pump on Fiat Panda 4x4 (169)

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Fuel pump

Today we will see, in this video tutorial, how to disassemble and replace the fuel pump or the low pressure float pump on a Fiat Panda 4x4 (169). First we open the rear doors of our car and we go to remove the rear bench; then we remove the plastic cover to access the pump, as shown in the video. At this point we disconnect the electrical connector of the fuel level sensor and the fuel pipe; now we unscrew the ring nut of the pump with the appropriate wrench or by beating with a flat screwdriver. Remove and replace the pump!

Posted on 27 May 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace or repair the fuel pump on a Fiat Panda
How to replace or repair the fuel pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let's see how to replace or repair the fuel pump on a Fiat Panda. We disconnect the battery cables, then, we remove the rear seats of the car. We wil…
How to change the engine oil and oil filter on Fiat Panda 169 4x4
How to change the engine oil and oil filter on Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let's find out the procedure that will allow us to carry out the routine maintenance service, replacing the engine oil and the oil filter, on the Fia…
Guide to replacing the thermostat of the Fiat Panda 4x4 1.3 MultiJet
Guide to replacing the thermostat of the Fiat Panda 4x4 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) In this guide, we will see the instructions that will allow us to disassemble and replace the thermostat of the Fiat Panda 4x4 1.3 MultiJet. Let's op…

Other guides you may be interested in

How to Open the Key Battery of a Volkswagen Golf 7

How do you open the key fob of a Volkswagen Golf Series 7? Take your key fob and press the release button of the metal key; once the metal key pops out, use a screwdriver to pry between the two halves of the key fob (in the space where the metal key fits). Pry until the cover opens, then extract the worn battery with a small screwdriver. Get a new battery of the same size and voltage. Join the two parts: press the key fob case until you hear it click into place. Check the proper functioning of the key fob by operating the buttons.

Watch the video!


by ScegliAuto

More videos