Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mass Air Flow Sensor on Fiat Bravo 2

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: MAF sensor

In this video, you will see how to remove the mass air flow sensor, commonly known as the MAF sensor, on a Fiat Bravo second series with a 1.6 MultiJet engine. First, open the bonnet of your car and locate the MAF sensor on the left side of the engine bay; then start by disconnecting the electrical connector of the sensor by lifting the yellow tab upwards. At this point, unscrew the clips and remove the intake hose along with the mass air flow sensor, replacing it with the new one; all that’s left is to reassemble everything!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Air Filter on a Fiat Bravo
How to Remove and Replace the Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Want to replace the air filter in your car? Here’s how to remove and replace the engine air filter on a Fiat Bravo: lift the car using a column lift …
Replacing the Cabin Air Filter on a Fiat Bravo
Replacing the Cabin Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will learn how to remove and replace the cabin air filter of a second series Fiat Bravo. The air filter is located at the…
How to Remove the Cabin Air Filter on a Fiat Bravo
How to Remove the Cabin Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Does removing the cabin air filter seem like a difficult task? Let's see in this video how to remove and replace the cabin air filter on a Fiat Bravo…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos