Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Cap Strap on a Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Fuel cap

To replace the fuel cap strap on the Fiat Bravo, first use a flat screwdriver to lift the tab on the flap and extract the strap. By removing the cap with the appropriate key, you can also take off the part of the strap attached to the cap and its support. Then, remove the old strap from the support and replace it with a new spare part. Consequently, insert the strap with its support onto the cap, and the other end of the strap into the designated slot on the flap.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on a Fiat Bravo 2 1.6 MultiJet
Replacing the Diesel Filter on a Fiat Bravo 2 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will learn how to remove and replace the diesel filter on a second series Fiat Bravo in simple and quick steps. First, op…
How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
How to replace the diesel filter of the Fiat Bravo 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) Below we will discover the steps that will allow us to disassemble and replace the diesel filter of the Fiat Bravo 1.6 MultiJet. First, we open the h…
How to replace the filter and engine oil on the Fiat Bravo 2
How to replace the filter and engine oil on the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) When the oil light comes on in a Fiat Bravo car, it is necessary to replace the oil and the oil filter. We open the front hood and the oil tank cap. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos