Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight on a Fiat Bravo 2

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Headlight

In today's video, we will see how to remove and replace the front headlights on a second-generation Fiat Bravo in simple steps. First, open the bonnet of your car and remove the front wheels by lifting the vehicle; then unscrew the screws found in the wheel arch to remove them, as illustrated in the video. At this point, unscrew the nuts to detach the front bumper from the side; unscrew the top screws of the headlights and disconnect the electrical cables to remove them and replace them with new ones. Follow the video to the end!

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on Fiat Bravo
How to Replace the Front Headlight Bulbs on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let’s see how to replace the front headlight bulbs on Fiat Bravo: open the front bonnet by pulling the lever located at the bottom right of the dashb…
How to Replace the Front Headlamp Bulbs on a Fiat Bravo
How to Replace the Front Headlamp Bulbs on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let’s see how to replace the front headlamp bulbs fitted on a Fiat Bravo. Open the front bonnet by pulling the lever located at the bottom right of t…
Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo
Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This guide will show you how to remove and replace the front headlamp bulb on the Fiat Bravo; this operation is done with the headlamp removed. First…

Other guides you may be interested in

    Frequently Asked Questions

    • Bravo 2007-2014 - Why do the front headlights of the Fiat Bravo no longer work? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos