Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front wheel of a Fiat Talento

Model: Fiat Ducato - Years 1981-1994
Part: Wheel

Before we can start, we will have to get out of the cockpit of our Fiat Talento, and then head towards the front wheel. So let's start by lifting the front, using the appropriate jack. Next, we will have to go to disengage and remove the front wheel hub cap. Once this is done, we will have to unscrew and remove the bolts that secure the wheel to the front hub. By doing so, we will have freed the front wheel itself. We then proceed by going to extract the front wheel from the hub. When we have completed this step, we will have successfully completed its disassembly.

Posted on 25 January 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spare wheel on the Fiat Ducato
How to replace the spare wheel on the Fiat Ducato
Fiat Ducato (2014-2024 / X290) In today's video tutorial we will see the steps that will allow us to remove and replace the wheel with the spare wheel of the Fiat Ducato, in the Ca…
Where is it and how to remove the spare wheel of a Fiat Ducato
Where is it and how to remove the spare wheel of a Fiat Ducato
Fiat Ducato (2006-2014 / X250) The spare wheel of our Fiat Ducato is located under the rear axle. Before we can start disassembling it, therefore, we will have to go and slightly r…
How do you remove the front wheel of the Fiat Ducato?
How do you remove the front wheel of the Fiat Ducato?
Fiat Ducato (2006-2014 / X250) In order to replace the front wheel of the Fiat Ducato, the jack supplied must be positioned so that the corresponding wheel does not touch the groun…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos