Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Spark Plug Replacement Instructions

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Spark plugs

See other generations:
Video tutorial

Before proceeding with the spark plug replacement, wait for the engine to cool down; then remove the air filter box, disconnect the spark plug leads, and blow compressed air into the spark plug holes to eliminate any dirt that could enter the cylinders during disassembly; then unscrew the spark plugs, remove them from their seats, checking for carbon buildup and any oil presence; insert the new spark plugs without exceeding the torque specification, clean the leads with contact cleaner spray, and insert them ensuring a proper fit.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs and Ignition Leads on a Fiat Punto 1.2 8V
How to Replace the Spark Plugs and Ignition Leads on a Fiat Punto 1.2 8V
Fiat Punto (1999-2011 / MK 2, 188) Today, we will see, in this brief and simple guide, the instructions to disassemble and replace the spark plugs and ignition leads on a Fiat Punto 1.…
How to Remove the Spark Plugs from a Fiat Punto
How to Remove the Spark Plugs from a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the spark plugs from a Fiat Punto? Open the front bonnet and proceed with the spark plug removal. Lift the bonnet and secure it, then r…
Replacing the Spark Plugs on a Fiat Punto
Replacing the Spark Plugs on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this short video tutorial, you will see how to replace the spark plugs on a second-generation Fiat Punto, produced from 1999 to 2011. Start by ope…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos