Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Central Locking on the Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Key

See other generations:
Video tutorial

There are kits available on the market that allow you to install central locking on vehicles that do not have it as standard. The kit consists of two actuators and corresponding rods to control the opening and closing of the door lock.

It also includes a control unit and a remote. The control unit can be positioned under the driver's side mat near the bonnet release lever, and from there, you can route the actuator cables through the existing holes in the doors.

Then, remove the interior panels of the doors and secure the actuators to the bodywork. Be careful when securing the actuator pin that controls the door lock using the screws provided in the kit.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Install Central Locking on a Fiat Panda?
How to Install Central Locking on a Fiat Panda?
Fiat Panda (1980-2003 / MK 1, 141) To install the central locking system on a Fiat Panda, you need to fit a control unit that will manage the system's operation: this control unit shou…
How to Install the Central Locking Control Unit of the Fiat Panda?
How to Install the Central Locking Control Unit of the Fiat Panda?
Fiat Panda (1980-2003 / MK 1, 141) To install the central locking control unit of the Fiat Panda, connect the device's wires as shown in the video. Once the wires are connected, remove…
Where is the central locking fuse located in the Fiat Panda?
Where is the central locking fuse located in the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) In case of a malfunction with the central locking system of the Fiat Panda, first check the status of the respective fuse, the location of which is i…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos