Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Indicator on a Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

To reset the service indicator on a Fiat Ducato, there are two methods. The first method is as follows: first, turn on the ignition, press the accelerator pedal all the way down, and press the brake pedal seven times.

Then, keep the accelerator pressed for one minute, after which release the accelerator and turn off the ignition. Wait one minute, remove the key, then reinsert it and start the engine.

The second method is: turn off the ignition, press the accelerator and brake pedals for 15 seconds. Then, turn on the ignition while holding the accelerator and brake for another 10 seconds.

At this point, release the brake pedal while keeping the accelerator pressed for 5 seconds. After 5 seconds, press the brake pedal five times.

Finally, with only the accelerator pressed, turn off and turn on the ignition.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Fiat Ducato (2002-2006 / ) Before starting, sit in the driver's seat of your Fiat Ducato. Begin by activating the instrument panel by turning the key in the ignition. Next, pre…
Fiat Ducato (2014-2026 / X290) Let's see how to reset the oil service maintenance indicator on a Fiat Ducato. This operation is very simple: enter the vehicle, turn on the instrume…
Fiat Ducato (2002-2006 / ) Resetting the service light on a Fiat Ducato van is very simple. Follow these steps in this tutorial. This operation should only be performed after c…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - What does the red engine light on the Fiat Ducato 2 indicate? Read answer
    • Ducato 2002-2006 - What does the yellow triangle warning light mean on Fiat Ducato? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos