Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the front grille of the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Punto EVO, Grandepunto - Years 2005-2018
Part: Body

If we want to personalize the car by replacing the lower grille, i.e. the one located under the number plate, we must proceed as follows: use a pointed object to gently release the grille fastening clips on the bumper. Since there is a reinforcing metal profile under the grille and this part is exposed to contact, for example with sidewalks or speed bumps, the latter could be deformed and therefore lifted, so to disassemble and reassemble a new grille it could be need to straighten it. Then take the new template and place it on its seat, pressing to fit the clips.

Posted on 16 December 2022 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the horn / horn Fiat Grande Punto
Disassembly of the horn / horn Fiat Grande Punto
Fiat Punto (1999-2011 / MK 2, 188) In today's video tutorial we will see how to remove the horn of a Fiat Grande Punto. First we open and lift the bonnet and we go to remove the grille…
Logo and grille restoration on Fiat Grande Punto
Logo and grille restoration on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) Let's see how to restore the logo and grille of a Fiat Grade Punto: For about 15.00 euros we can buy a grille on E-Bay. Our youtuber has modified the…
Replacement of the stop light switch of the Fiat Grande Punto
Replacement of the stop light switch of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) These short and simple instructions will show us the process of disassembling and replacing the stop light switch of the Fiat Grande Punto, as well a…

Other guides you may be interested in

How to Remove the Spark Plugs from a Volkswagen Up

How to remove and replace the spark plugs on a Volkswagen Up? Follow these steps for proper removal. Pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove the plastic soundproofing panel on the cylinder head, then disconnect the power connectors using a screwdriver after unscrewing them with a socket wrench. Pull off the coils by hand and unscrew the spark plugs with the socket wrench, finally pulling them out of the cylinder head. Take the new spark plugs and guide them into the engine head using the extension of the socket wrench. Finally, tighten the spark plugs securely and reconnect the respective power connectors. To finish: reassemble the soundproofing panel and close the engine bonnet. - Socket wrench with sockets - Flat or screwdriver bits - Battery-powered screwdriver - Protective gloves.

Watch the video!


by ScegliAuto

More videos