Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel from the Fiat Panda 141

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Steering wheel

In today's video, learn how to replace the steering wheel on the Fiat Panda 141 with a new boss unit. First, remove the central bearing. Now, using a spanner, loosen the retaining bolt and finish the operation by hand. Pull it towards you, being careful with its exit from the guides. Next, insert the new boss, tightening the retaining bolt. Also, insert the corresponding cap and screw in the relevant screws. Finally, insert the new steering wheel and secure it. Operation complete. Simple and quick.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper from a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Hello everyone! In this tutorial, you will learn how to remove the front bumper from an old model Fiat Panda. Although it is possible to remove the b…
How to Dismantle the Rear Wiper Motor of the Fiat Panda 4x4 (141)
How to Dismantle the Rear Wiper Motor of the Fiat Panda 4x4 (141)
Fiat Panda (1980-2003 / 141, MK 1) In this video, you will see the steps that will allow you to dismantle and replace the rear wiper motor of the first series Fiat Panda 4x4, version 1…
How to Replace the Carpet on the Fiat Panda 1 (141)
How to Replace the Carpet on the Fiat Panda 1 (141)
Fiat Panda (1980-2003 / 141, MK 1) In this video tutorial, you will learn how to remove and replace the carpet covering on the floor of the Fiat Panda 141, first series, following the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos