Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to disassemble the airbag module from a 2014 Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda MK 3, 319 - Years 2012-2023
Part: Airbags
Operation: How to disassemble the airbag module from a 2014 Fiat Panda

Removing the airbag module from the steering wheel of a Fiat Panda is much simpler than one might imagine. In fact, it is enough to identify the two points of detachment of the module, which are positioned on the back of the steering wheel, and aim at them simultaneously with two thin screwdrivers. In the meantime we will be able to remove the module from the front, because by doing this we will have detached it from its support. At this point, all we have to do is disconnect the electrical connectors (if necessary, take a picture to be sure of putting them all back in the right position) and the job is done.


Posted on 16 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - What does the phrase "airbag malfunction" on the Fiat Panda indicate? Read Answer
    • Panda 2012-2023 - Why does the airbag failure warning light come on in the FIAT Panda? Read Answer
    • Panda 2003-2012 - Where are the airbag control sensors on the Fiat Panda 169 located? Read Answer
    • Panda 2012-2021 - Why did the airbag failure warning light come on in the Fiat Panda? Read Answer
    • Panda 2012-2021 - What to do in the event of a Fiat Panda airbag failure? Read Answer
    • Panda 2003-2012 - What does the Fiat Panda airbag failure warning light indicate? Read Answer
    • Panda 2012-2023 - Airbag warning light on on Fiat Panda Read Answer
    • Panda 2003-2012 - Where is the Fiat Panda 169 airbag control unit located? Read Answer

How do you replace the battery of the BMW R 1250 GS?

In order to replace the battery of the BMW R 1250 GS it is necessary to loosen the bolts that secure the casing positioned on the left side of the bike, so that its cover can be removed. Once this has been removed, you will be able to access the components below, including the battery. The latter must be removed from its housing by disconnecting the power cables and unscrewing the appropriate fixing bolts. In this way it will be possible to insert a new battery, properly fixing it and connecting it to the relative cables, covering everything with the casing.

Watch the video!


by ScegliAuto

More videos