Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front seats of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Seat

To replace the front seats of the Fiat Panda, start by sliding the passenger seat back, then unscrew the two front Allen bolts. With the backrest tilted forward, unscrew the two rear bolts. Move the seat forward to detach the hook at the bottom of the seat rails from the body; perform the same operation on the driver's side. Once the seat is unhooked, you can pass it through the passenger side so that the steering wheel does not obstruct the removal. Now take the replacement seats, install the driver's seat by passing it through the passenger side, screw in the bolts, and repeat the same operation with the passenger seat, ensuring the hook at the bottom of the seat rails is secured.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Seats on a Fiat Panda 169
Removing the Front Seats on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will see the main steps that will allow you to remove the front seats from a Fiat Panda 169. First, open the front doors and start by unsc…
How to Remove the Front and Rear Seats of the Fiat Panda
How to Remove the Front and Rear Seats of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this guide, learn the procedure to remove the front and rear seats of the Fiat Panda. First, open all the doors and start by removing the rear ben…
Removing Front and Rear Seats on a Fiat Panda MK1
Removing Front and Rear Seats on a Fiat Panda MK1
Fiat Panda (1980-2003 / 141, MK 1) In this video, we will see how to remove the front and rear seats on a first-generation Fiat Panda 4x4, following the instructions below. First, open…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos