Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : How to reset the Service on Fiat Doblo

Fiat Doblo - Video tutorial

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Instrument cluster
Operation: How to reset the Service on Fiat Doblo

To reset the "Service" warning light on the Fiat Doblò, just follow this simple procedure. Close all doors and turn on the instrument cluster, but not the engine. Fully depress the accelerator pedal with your right foot and keep it pressed while, with your left foot, press the brake pedal seven times. When finished continue to hold the accelerator for 60 seconds. After one minute, release the accelerator pedal and turn off the ignition. Wait another 60 seconds and turn the instrument panel on again. The "Service" light, if everything has been done correctly, will no longer flash.


Posted on 9 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Doblo 2009-2021 - What are the warning lights of the Fiat Doblo? Read Answer
    • Doblo 2000-2009 - Where can I find the meaning of the warning lights in the Fiat Doblo? Read Answer
    • Doblo 2009-2021 - What does the message "service expired" mean on a Fiat Doblò? Read Answer
    • Doblo 2009-2021 - What are the red warning lights on Fiat Doblo? Read Answer
    • Doblo 2009-2021 - What does it mean when the oil light flashes on the Fiat Doblo?? Read Answer
    • Doblo 2009-2021 - What is the meaning of the Fiat Doblo warning lights? Read Answer
    • Doblo 2009-2021 - What does the Fiat Doblo 2 service light indicate? Read Answer
    • Doblo 2009-2021 - How do you reset the tire pressure warning light on the Fiat Doblò? Read Answer
    • Doblo 2009-2021 - What do the yellow warning lights on the Fiat Doblò indicate? Read Answer
    • Doblo 2009-2021 - Reset the oil warning light on Fiat Doblò? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos