Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the air filter on a Fiat 500.

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Air filter
Operation: How to replace the air filter on a Fiat 500.

If the engine of your Fiat 500 overheats much more easily than in the past, it means it's time to replace the air filter inside the engine compartment of the car. Let's find out how. First of all, turn off the car so that you can intervene in maximum safety and then lift the front hood completely. At this point, locate the central box and unscrew all the various screws that hold the cover firmly with a special key. Once you have done this, lift the protective cover and remove the old filter. Finally, install the new one and tighten all the screws of the cover.


Posted on 3 May 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2021 - Where is the cabin filter located in the Fiat 500? Read Answer
    • 500 2014-2022 - Where is the Fiat 500x cabin air filter located? Read Answer
    • 500 2014-2022 - Costs for replacing engine and passenger compartment air filters for Fiat 500 x mjt? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos