Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil Yourself

Model: Fiat Bravo - Years 1995-2001
Part: Engine oil

An important operation to perform at intervals of about 9,300 miles to keep your engine efficient.
Position the car on a level surface with the engine warm, place a suitable container under the oil drain plug located at the bottom of the engine block and unscrew it to let the fluid drain out.
Once the tank is empty, check and, if necessary, replace the gasket on the plug and screw it back on to the correct torque.
Using the appropriate tool, remove the oil filter for replacement.
Refill the tank with new oil suitable for your car.

In the video, the operation is performed on a Fiat Bravo.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to do an oil service on a Fiat Bravo diesel
How to do an oil service on a Fiat Bravo diesel
Fiat Bravo (2007-2014 / Bravo 2) In this video we see how to do the service on a Fiat Bravo with a diesel engine: to do this operation it is necessary to lift the car and remove the …
How to replace the filter and engine oil on the Fiat Bravo 2
How to replace the filter and engine oil on the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) When the oil light comes on in a Fiat Bravo car, it is necessary to replace the oil and the oil filter. We open the front hood and the oil tank cap. …
How to reset the service on Fiat Bravo.
How to reset the service on Fiat Bravo.
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial you can see how you can reset the maintenance warning light on Fiat Bravo with simple essential steps. First you must go to an…

Other guides you may be interested in

How to Remove the Front Door Panel on a Volkswagen Polo

How to remove the driver’s side door panel on a Volkswagen Polo? This video explains the procedure. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to pry off the handle cover (remove the piece), then, with a screwdriver, unscrew the fastening screws in the handle inside the door panel. Unscrew the screws located in the plastic of the door opening lever. Use the lever to detach the retaining clips around the perimeter of the door panel. Finally, grasp the panel with your hands and lever it off the door. Disconnect the cable from the door opening lever and the power connectors for the window switch.

Watch the video!


by ScegliAuto

More videos