Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Alternator from a Fiat Multipla 1900 MultiJet

Model: Fiat Multipla MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Alternator

Video tutorial

To remove the alternator, it is advisable to pull it out from below, passing it behind the oil sump. Start by loosening the auxiliary belt tensioner from the engine bay to free the alternator pulley.

Disconnect the negative terminal of the battery and remove the cables connected to the alternator. Then access from the wheel arch to unscrew the alternator mounting bolts.

Loosen the engine cradle bolts to lower it slightly, providing more space to manoeuvre for the removal of the alternator.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Engine Oil Change and Service on Fiat Multipla 2 MultiJet
Engine Oil Change and Service on Fiat Multipla 2 MultiJet
Fiat Multipla (1998-2010 / MK 1) In this video, we will show you how to change the engine oil and oil filter while also performing the routine service on a second-generation Fiat Mul…
How to Change the Alternator on the Fiat Multipla
How to Change the Alternator on the Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) If the battery warning light remains illuminated on the instrument panel, it means the alternator is not charging it. This could be due to a simple b…
How to Remove the Battery from a Fiat Multipla
How to Remove the Battery from a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos