Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs in a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Spark plugs

See other generations:
Video tutorial

Replacing the spark plugs in a Fiat Grande Punto is a very simple and quick operation. Let's see how to proceed in this tutorial.

First, wait for the engine to be completely cold, then open the bonnet, disconnect the negative terminal of the battery, and remove the air filter box. Next, unscrew the fixing screws of the coils, remove them from the cylinder head, and proceed to unscrew the first spark plug using a socket wrench and an extension.

At this point, insert the replacement, tighten it with a torque wrench set to 18 Nm, and repeat the process for the remaining three spark plugs.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on the Fiat Grande Punto
How to Replace the Spark Plugs on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below is the procedure to remove and replace the engine spark plugs on the Fiat Grande Punto, following the instructions provided. First, open the bo…
How to Replace the Spark Plugs on the Fiat Grande Punto 1.2
How to Replace the Spark Plugs on the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will see the symptoms that indicate it is time to replace the spark plugs on the Fiat Grande Punto 1.2, as well as how to…
How to Replace the Spark Plugs on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the spark plugs on a Fiat Grande Punto, open the bonnet to remove the plastic cover from the top of the engine bay by loosening the screws…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos