Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Airbag ECU on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Control unit

See other generations:
Video tutorial

This video shows how to replace the airbag ECU when the light remains on along with the error "fuel interruption unavailable, start & stop unavailable" and the seatbelt light stays illuminated. The mileage flashes and various other errors are detected with the ODB11 scanner.

The airbag ECU is faulty, and we need to remove and replace it. Before starting the work, disconnect the battery. The ECU is located in the driver's footwell (this is a right-hand drive), under the carpet, and there are some screws to remove.

At the bottom, you will find two electrical connectors to disconnect. The website ecuconnection.co.uk offers various reprogramming or repair services for your unit at costs ranging from £49.17 to £162.50. There is also a helpful video guide for removing and reinstalling the unit.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2022 / 312) In this video tutorial, you will learn how to remove and replace the ECU of the Fiat 500 Abarth, following the instructions below. First, open the bo…
Fiat 500 (2014-2022 / 500 X) Today we will explain how to remove the steering wheel airbag from the Fiat 500 X. To remove the airbag, we need to insert a flat-head screwdriver in…
Fiat 500 (2007-2021 / 312) How do you remove the airbag from a Fiat 500? Here’s how to take off the airbag from above the steering wheel. Enter the cabin, locate the holes behi…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - Where is the bluetooth control unit of the Fiat 500 located? Read answer
    • 500 2007-2024 - Ebd failure on Fiat 500, what does it mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos