Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Fiat Seicento

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Fuel pump

The low-pressure fuel pump functions to transfer fuel from the tank to the engine, especially during the ignition phase: when the ignition is turned on, an electric pump submerged directly in the tank is activated (you can usually hear its characteristic sound) and is attached to the so-called bucket, which, in addition to the pump, houses the float system for the fuel level indicator on the dashboard; to replace this device, simply remove the passenger seat and access the pump housing by disconnecting the connector, pipes, and unscrewing the corresponding fixing flange.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel pump of the Fiat Seicento
How to replace the fuel pump of the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Today we will see, in this video tutorial, the main steps that will allow us to disassemble and replace the fuel pump of the Fiat Seicento. First of …
Fiat 600 fuel pump disassembly instructions
Fiat Seicento (1998-2010 / MK 1) Let's see in this video the main instructions that will allow us to disassemble the fuel pump on a Fiat 600. First we access the rear part of the car…
How to remove the fuel pump on Fiat Seicento
How to remove the fuel pump on Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) How to remove the fuel pump on Fiat Seicento. First of all we lift the engine hood and put it in safety with the dipstick, then, we remove the soundp…

Other guides you may be interested in

How to Remove the Interior Handle on a Volkswagen Golf

In this video, see how to remove and replace the interior handle of a Volkswagen Golf. This operation is straightforward if you follow the correct steps. First, use a screwdriver to unclip the metal clips of the levers, then take the handle and pull it out from the support. Once the first support is removed, proceed to remove the other support in the same manner. Complete the disassembly of the part: install the new handle with all the supporting brackets as removed previously. Finally, test the correct operation of the handle.

Watch the video!


by ScegliAuto

More videos