Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt on a Fiat Ducato?

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

The procedure for replacing the timing belt on a Fiat Ducato involves opening the bonnet to access the engine compartment and removing the cover from the left side of the engine block. You will also need to remove the front right wheel by loosening the appropriate bolts and the corresponding wheel arch.

This will allow access to the pulleys and specifically to the tensioner pulley, which must be loosened to reduce the tension on the belt. The old belt can now be removed and replaced with a new spare part, re-tightening the pulley nuts and reassembling the removed parts.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Fiat Ducato 2.3
How to Replace the Timing Belt on a Fiat Ducato 2.3
Fiat Ducato (2006-2014 / X250) .. In this very short video tutorial, learn how to replace the timing belt on a Fiat Ducato produced from 2006 to 2014. This operation is complicated.. …
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) This guide provides key information on how and when to remove and replace the timing belt on the Fiat Ducato 2.3 Multijet; generally, for this type o…
How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD
How to Replace the Timing Belt on a Fiat Ducato 2.8 JTD
Fiat Ducato (2006-2014 / X250) The presented video helps when you need to replace the timing belt on the Fiat Ducato. Specifically, the work shown does not only demonstrate how to …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos