Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install fog lights on the Ducato X250

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fog lights

See other generations:
Video tutorial

In this video, see how to install fog lights on a Ducato X250 that was factory-fitted without them; open the fuse box located in the engine compartment, and indeed, the fog light relay is missing, which we will need to insert. If it fits normally, it means the system is already prepared; otherwise, we will have to dismantle the control unit to open it, which is exactly the case we see. We will need to obtain the body computer connector, a relay control unit connector, and a switch panel with the fog light button.

We see that in the positions that should host the relay and the fog light fuse, the extension fastons are missing, which is why they do not fit perfectly. Follow the instructions on how to move the fastons from empty positions to those we need and remove the parts we need from those recovered from a scrap yard to complete the preparation for the fog lights in the body computer; then install the switch panel including the fog light lamp; the fog light door must be opened via diagnostics in the body computer, so if we can do it ourselves via an OBD11, otherwise we need to get help from a workshop; then install the fog lights and carry out all electrical connections.

We can use the fog lights.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to Install Fog Lights on Fiat Ducato
How to Install Fog Lights on Fiat Ducato
Fiat Ducato (2014-2026 / X290) To install fog lights on a Fiat Ducato, turn off the vehicle and disconnect the battery. Remove the plastic covers in the front bumper at the designa…
Replacing the Position Light Bulb of the Fiat Ducato X250
Replacing the Position Light Bulb of the Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) Let's see how to replace the position light bulb of the Fiat Ducato when it burns out. Open the front bonnet and position yourself near the headlamp …
Replacing the Radiator Fluid on the Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) In this guide, we will discover how to replace the coolant in the Fiat Ducato X250 in simple steps. First, open the bonnet and start by removing the …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos