Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the EGR valve in the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: EGR valve

In this tutorial we can see how to clean the EGR valve in the Ford Focus, a very simple operation to be carried out for example in case the engine performance is no longer optimal. First of all, we wait for the engine to cool down, then we open the hood and remove the plastic cover. We then move the various indicated wiring, unscrew the two fixing bolts with a Torx T30 key and disconnect the sensor connector. At this point we can remove the valve from the support, clean it using one of the specific solvents and reassemble it following the reverse procedure.

Posted on 17 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the EGR valve in the Ford Focus 1.6 TDCi?
How do you disassemble the EGR valve in the Ford Focus 1.6 TDCi?
Ford Focus (2011-2018 / MK 3) The EGR valve is a device installed in car engines, with the purpose of recovering a percentage of exhaust gases and injecting them into the intake m…
Replacing the EGR Valve on a Ford Focus
Replacing the EGR Valve on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The EGR valve should be replaced if damaged or if you have issues with your car, here’s how to remove it on a Ford Focus. Lift the engine bonnet and …
How to Replace the EGR Valve in a Ford Focus?
How to Replace the EGR Valve in a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, see how to replace the EGR valve in a Ford Focus, a straightforward task if you have good manual skills. First, wait for the engine…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos