Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the coolant temperature sensor located in the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Engine coolant temperature sensor

In this video we can see where the coolant temperature sensor is located in the Ford Fiesta, useful in case we need to replace it, an extremely simple and fast operation. As shown, the sensor in question is located on the left side of the engine, right in the upper area of the thermostat. To access it, it will be enough to open the hood and remove the plastic cover, while to replace it we will first have to disconnect the power connector and then unscrew it using an adjustable wrench. Make sure to work with the vehicle completely cool.

Posted on 12 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the outside temperature sensor located in the Ford Fiesta?
Where is the outside temperature sensor located in the Ford Fiesta?
Ford Fiesta (2008-2017 / MK 6, MK VI, Fiesta 6) In this video we can see where the outside temperature sensor is located in the Ford Fiesta and how to proceed if we need to replace it, a very simpl…
How to replace the coolant in the Ford Fiesta.
How to replace the coolant in the Ford Fiesta.
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Let's replace the coolant of the Ford Fiesta by unscrewing the clamp that holds the air filter tube and removing the entire filter box. Now, go under…
How to remove the Ford Fiesta radiator tank
Ford Fiesta (2008-2017 / MK 6, MK VI, Fiesta 6) How to remove the coolant reservoir? We see the disassembly of the pan in the engine compartment of a Ford Fiesta. We lift the front hood to access t…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos