Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Clutch

See other generations:
Video tutorial

Watch this video to learn how to replace the clutch on a Ford Focus. Disconnect the battery terminals to protect the car's components.

First, lift the vehicle on a column lift to the desired height, then remove the plastic panel covering the engine (if present at the bottom) using the appropriate pins. Remove the front wheels for better access, then undo the hub bolts with a socket spanner and take them out. Drain the oil from the gearbox and keep it for reuse.

Locate the gear lever; there are two pins underneath that hold the clutch under tension. Remove all clutch components.

Prepare to fit the new clutch disc with the accompanying parts. Proceed with the reverse assembly of the operations.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Replacing or Installing the Clutch Pedal Spring on the Ford Focus
Replacing or Installing the Clutch Pedal Spring on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's main steps will show you how to replace or install the clutch pedal spring on the Ford Focus. First, open the driver's side front door and re…
How to Replace the Clutch Pedal on the Ford Focus
How to Replace the Clutch Pedal on the Ford Focus
Ford Focus (2011-2018 / MK 3) Follow the main instructions on how to remove and replace the clutch pedal on the Ford Focus. First, open the bonnet and begin by removing the batter…
Replacing the Clutch Master Cylinder on the Ford Focus
Replacing the Clutch Master Cylinder on the Ford Focus
Ford Focus (2011-2018 / MK 3) Below, we will see the step-by-step instructions on how to remove and replace the clutch master cylinder on the Ford Focus. First, open the bonnet of…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos