Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light in a Ford Transit Connect Van?

Model: Ford Transit MK 8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, you will learn how to reset the tyre warning light in a Ford Transit Connect van. This operation is very simple and quick, to be performed only after restoring the correct pressure in each tyre according to the manual's instructions.

First, enter the cabin, then insert the key and turn on the instrument cluster.

Next, access the general menu using the directional buttons on the steering wheel, go to "Settings", then "Driver assist", "Tyre monitor", and perform the reset by holding down the "OK" button. To complete the procedure, restart the vehicle.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure light in the Ford Transit Connect?
How do you reset the tire pressure light in the Ford Transit Connect?
Ford Transit (2006-2014 / MK 7) The Ford Transit Connect also benefits from the help of tire pressure monitoring sensors, which promptly warn by lighting up the warning light in cas…
How to Reset the Tyre Pressure Light on a Ford Transit Connect
How to Reset the Tyre Pressure Light on a Ford Transit Connect
Ford Transit (2014-2024 / MK 8) To reset the tyre pressure light on a Ford Transit Connect, use the controls on the left side of the steering wheel. First, turn on the ignition and …
How to Reset the Tyre Pressure Light on a Ford Transit?
How to Reset the Tyre Pressure Light on a Ford Transit?
Ford Transit (2014-2024 / MK 8) To reset the tyre pressure light on a Ford Transit, first inflate the tyres to the recommended pressure. This pressure value is indicated on the stic…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos