Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light cluster of the Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light

In this video we can see how to replace the stop light bulb on the Ford Fiesta MK6: to remove the rear light unit and therefore replace the bulb we are interested in, we will have to remove the two visible screws, top and bottom, on the rear hood sill. But unfortunately these are not the only screws holding the headlight. In fact, we must enter the trunk and move the lining carpet, and a part of the rear window pillar lining; inside, corresponding to the center of the headlight, we find a butterfly screw that releases the headlight unit. At that point we just have to disconnect the electrical connectors and pull towards us.

Posted on 2 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the Ford 6000 CD car radio from the Ford Fiesta
How to remove the Ford 6000 CD car radio from the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Thanks to the following video tutorial, we will show you the steps to remove the Ford 6000 CD radio from Ford vehicles. The Ford vehicles on which we…
Where is the OBD2 port of the Ford Fiesta 6?
Where is the OBD2 port of the Ford Fiesta 6?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To easily locate the OBD2 port inside the cabin of your Ford Fiesta Mk6, just pay attention to the various steps described below and apply them in th…
How to reset the TPMS light on the Ford Fiesta Ecoboost
How to reset the TPMS light on the Ford Fiesta Ecoboost
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) We can see in this video how to reset the tire pressure light on the Ford Fiesta MK6. We will need to act through the control panel located on the le…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos