Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs of the Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Headlight bulb

In this guide, we will see the steps that will allow us to disassemble and replace the bulbs of the front headlight of the Ford Transit. First, we open the vehicle's engine hood and start disassembling and removing the optical group by unscrewing the fixing screws found on the top; then we remove the plastic cover protecting the low beam bulb and disconnect the electrical connector to remove it, as shown in the video. If necessary, we also replace the other bulbs of the optical group, respecting the type of bulbs; finally, we reassemble the front headlight!

Posted on 4 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs of the Ford Transit Custom
How to Replace the Rear Headlight Bulbs of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today, we will discover the instructions to remove and replace the rear headlight bulbs of the Ford Transit Custom. First, open the rear doors and st…
How to Replace the Rear Light Bulbs on a Ford Transit
How to Replace the Rear Light Bulbs on a Ford Transit
Ford Transit (2000-2006 / MK 6) In this tutorial, you will learn how to remove and replace the rear light bulbs and the entire rear lamp on a Ford Transit. First, open the rear door…
How to replace the front headlight bulb of the Ford Transit Custom
How to replace the front headlight bulb of the Ford Transit Custom
Ford Transit (2014-2024 / MK 8) The following procedure will show us how to disassemble and replace the headlight bulb of the Ford Transit. First, we open the vehicle's hood and sta…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos