Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Ford Mondeo key

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part: Key

The tutorial shows us how to change the battery of the key remote of a Ford Mondeo car. The first step to take is to remove the metal key inside the remote. To do this, simply press the button on the top of the casing and pull out the key by pulling the end of the remote outward. At this point, you can use the key itself to open the battery compartment: insert the tip of the key into the groove on the upper edge of the casing and lever it outwards. Remove the exhausted battery using a small screwdriver and proceed to replace it. The necessary model is a flat 2450 3V battery.

Posted on 25 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Battery in a Ford Mondeo Key
How to Change the Battery in a Ford Mondeo Key
Ford Mondeo / Fusion (2007-2014 / MK 3) Change the battery in a Ford Mondeo key remote by following these simple steps. Take your remote and press the release button of the metal key. Use a…
How to Replace the Remote Battery on a Ford Mondeo?
How to Replace the Remote Battery on a Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) To replace the battery in the remote for a Ford Mondeo, slide the key out from the top of the device to leverage it open. Once this is done, open the…
How to Change the Battery in the Ford Mondeo Remote?
How to Change the Battery in the Ford Mondeo Remote?
Ford Mondeo / Fusion (2000-2007 / MK 2) Replacing the battery (CR 2032 version) in the remote key for this Ford model is quite simple. You need a small flathead screwdriver; just below the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos