Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Ford Transit Custom

Model: Ford Transit Custom - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

The steps to replace the battery of the Ford Transit Custom are simple and quick to perform independently. The first step is to disconnect the fuse connector related to the battery, located inside the front hood to prevent any current leakage during the replacement.

The second step is to remove the front seat on the driver's side as the battery is located underneath it. Use a T40 key to remove the seat base. The third step is to remove the seat and the underlying carpet to access the battery compartment.

The fourth step is to disconnect the negative pole of the battery and then disconnect the positive pole. The fifth step is to remove the old battery and replace it with a new one. The sixth step is to connect the negative terminal and then the positive terminal on the battery.

The seventh step is to close the battery compartment, place the carpet back, and reassemble the seat. After connecting the fuse connector, the battery will work.


Posted on 20 July 2025 by ScegliAuto


Related tutorials

Ford Transit (2023-2026 / Custom2) In this tutorial, you will learn how to replace the remote battery on the Ford Transit Custom van, a very simple and quick operation. For this, you w…
Ford Transit (2012-2024 / Custom) The 12-volt battery that powers the Ford Transit Custom is not located in the engine bay, as is the case with most vehicles, but rather in the cabin,…
Ford Transit (2012-2024 / Custom) .. review the instructions that will guide us on how to replace the battery of the Ford Transit Custom key remote. First, take the remote in hand and.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2014-2024 - Where is the battery in the Ford Transit? Read answer
    • Transit 2014-2024 - Where is the battery located on a Ford Transit Custom? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos