Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Ford B-Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Door trim panel

How to remove the door panel (front right) on a Ford B-Max? Follow these steps: disconnect the battery terminals located in the engine bay, using a screwdriver, undo the screws located in the space of the upper door opening lever and the screws present in the handle (after removing the plastic screw covers). Remove the covering plastic above the handle (switch panel), undo the remaining screws on the door panel and detach the securing clips. Pull the panel away with your hands and detach it from the door (disconnect the power wiring and the opening cable).

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fan Resistor on a Ford B-Max
How to Replace the Fan Resistor on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, dis…
How to Remove the Headrests on a Ford B Max
How to Remove the Headrests on a Ford B Max
Ford B Max (2012-2018 / MK 1) Learn how to remove the front headrest on a Ford B Max. This video explains the procedure: First, open the door and enter the rear of the car (rear p…
How to deactivate the passenger airbag in the Ford B-MAX?
How to deactivate the passenger airbag in the Ford B-MAX?
Ford B Max (2012-2018 / MK 1) In this tutorial, we can see how to deactivate the passenger airbag in the Ford B-MAX, an extremely simple operation necessary in case we place a chi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos